EnglishRenolin PG220 20Ltr
Item No. RENOLINPG220-20
Loading
Specifications
- Brand
- Renolin
Fully synthetic gear and lubricating oils based on special polyalkylene glycols (PAG) for applications with extreme thermal loads. Very high oxidation and ageing stability, high viscosity index (shear stable), good viscosity-temperature behavior, excellent load-carrying capacity, low coefficients of
Description
Fully synthetic gear and lubricating oils based on special polyalkylene glycols (PAG) for applications with extreme thermal loads. Very high oxidation and ageing stability, high viscosity index (shear stable), good viscosity-temperature behavior, excellent load-carrying capacity, low coefficients of friction, high FZG, very good pitting and high micropitting resistance, excellent FE8 performance.
The oils of the RENOLIN PG series surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517-3, ISO 6743-6 and ISO 129251: CKC, CKD, CKE, (CKS), CKT.
Approved by leading gearbox manufacturers.
Applications
For gearboxes operating in extreme thermal and mechanical conditions, such as worm gears and calander lubrication. Can also be used as compressor oils for process gases such as methanke, ethane, propane, etc. due to low hydrocarbon gas solubility. Particularly suitable for steel / bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils, ester oils and PAO-based oils.
Change-over guidelines must be observed.
Based on Polyglycol
The oils of the RENOLIN PG series surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517-3, ISO 6743-6 and ISO 129251: CKC, CKD, CKE, (CKS), CKT.
Approved by leading gearbox manufacturers.
Applications
For gearboxes operating in extreme thermal and mechanical conditions, such as worm gears and calander lubrication. Can also be used as compressor oils for process gases such as methanke, ethane, propane, etc. due to low hydrocarbon gas solubility. Particularly suitable for steel / bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils, ester oils and PAO-based oils.
Change-over guidelines must be observed.
Based on Polyglycol
- Density at 15°C:  1075 kg/m³
- Flash point Cleveland: 240 °C
- Kinematic viscosity at 40°C: 220mm²/s
- Kinematic viscosity at 100°C:  36.8mm²/s
- VI: 220
- Pourpoint: -33 °C
Item No. RENOLINPG220-20
Renolin PG220 20Ltr
Loading
Specifications
- Brand
- Renolin
Description
Fully synthetic gear and lubricating oils based on special polyalkylene glycols (PAG) for applications with extreme thermal loads. Very high oxidation and ageing stability, high viscosity index (shear stable), good viscosity-temperature behavior, excellent load-carrying capacity, low coefficients of friction, high FZG, very good pitting and high micropitting resistance, excellent FE8 performance.
The oils of the RENOLIN PG series surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517-3, ISO 6743-6 and ISO 129251: CKC, CKD, CKE, (CKS), CKT.
Approved by leading gearbox manufacturers.
Applications
For gearboxes operating in extreme thermal and mechanical conditions, such as worm gears and calander lubrication. Can also be used as compressor oils for process gases such as methanke, ethane, propane, etc. due to low hydrocarbon gas solubility. Particularly suitable for steel / bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils, ester oils and PAO-based oils.
Change-over guidelines must be observed.
Based on Polyglycol
The oils of the RENOLIN PG series surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517-3, ISO 6743-6 and ISO 129251: CKC, CKD, CKE, (CKS), CKT.
Approved by leading gearbox manufacturers.
Applications
For gearboxes operating in extreme thermal and mechanical conditions, such as worm gears and calander lubrication. Can also be used as compressor oils for process gases such as methanke, ethane, propane, etc. due to low hydrocarbon gas solubility. Particularly suitable for steel / bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils, ester oils and PAO-based oils.
Change-over guidelines must be observed.
Based on Polyglycol
- Density at 15°C:  1075 kg/m³
- Flash point Cleveland: 240 °C
- Kinematic viscosity at 40°C: 220mm²/s
- Kinematic viscosity at 100°C:  36.8mm²/s
- VI: 220
- Pourpoint: -33 °C