The range of RENOLIN AC COMPRESSOR OILS has been developed to embrace a wide range of equipment maker's specifications and requirements. The products have been subjected to ongoing development over many years and represent a modern approach to compressor lubrication. The range is based on selected low volatility mineral oil fractions to give freedom from deposits caused by oil carry over. Inhibitors are incorporated to control foaming, oxidation and to minimise mechanical wear.
- Low volatility
- Good separator/reclaimer life in vane and screw machines
- Low oil consumption and carry over
- Excellent oxidation stability
- Effective corrosion protection
RENOLIN AC46 is intended primarily for the lubrication of rotary screw type compressors. Final selection should be in accordance with equipment manufacturer’s recommendation. RENOLIN AC68 and AC100 are intended primarily for the lubrication of reciprocating compressors according to manufacturer’s recommendations. Both products may be used for the drip feed lubrication of gears and drive mechanisms in certain screw compressors where oils of this viscosity are stipulated by the machine manufacturers. RENOLIN AC68 and AC100 may also be used in certain sliding vane type compressors where oils of this viscosity are recommended by the equipment makers. Provide miniumum drain intervals of 2000hrs in screw and 1000hrs in vane use. RENOLIN AC150 is intended primarily for the lubrication of sliding vane type compressors and is approved by Hydrovane for use in machines of their manufacture for 500 hour drain periods. The range may be used in most vacuum pump applications where the viscosity is appropriate.