Pressol easyFILL Two Hand Grease Gun Assy G1/8"

Item No.14601001

Specifications

Brand
Pressol
Operates with NLGI 2 greases at at least 10°C.  Quantity of delivered grease at a back-pressure of 200 bar nearly unchanged after 40,000 operating cycles.  Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) At high back pressure, e.g. gummy lubrication point, lubrication can be ach

Description

Operates with NLGI 2 greases at at least 10°C.  Quantity of delivered grease at a back-pressure of 200 bar nearly unchanged after 40,000 operating cycles.  Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)

At high back pressure, e.g. gummy lubrication point, lubrication can be achieved with significantly less effort by shorter strokes.  Grease supply variable from 0,1 to 2,15 cm³ per stroke.  Thanks to the optimized hand lever kinematics, lubrication can be done with little effort.  The ease of dismantling permits simple cleaning.  Rolled thread on the grease gun tube resists damage from impact and allows quick and easy screwing-in by 1.5 turns.

  • High-speed ventilation, by half a rotation of the grease gun tube
  • Designed for use in rough conditions
  • Similar to DIN 1283
  • With hose bracket
  • Galvanized parts: hand lever, push rod handle
  • Grease gun head, zinc die casting Z 410
  • Ergonomic handle, non-slip, excellent power transfer and handling
Item No.14601001

Pressol easyFILL Two Hand Grease Gun Assy G1/8"

Specifications

Brand
Pressol

Description

Operates with NLGI 2 greases at at least 10°C.  Quantity of delivered grease at a back-pressure of 200 bar nearly unchanged after 40,000 operating cycles.  Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)

At high back pressure, e.g. gummy lubrication point, lubrication can be achieved with significantly less effort by shorter strokes.  Grease supply variable from 0,1 to 2,15 cm³ per stroke.  Thanks to the optimized hand lever kinematics, lubrication can be done with little effort.  The ease of dismantling permits simple cleaning.  Rolled thread on the grease gun tube resists damage from impact and allows quick and easy screwing-in by 1.5 turns.

  • High-speed ventilation, by half a rotation of the grease gun tube
  • Designed for use in rough conditions
  • Similar to DIN 1283
  • With hose bracket
  • Galvanized parts: hand lever, push rod handle
  • Grease gun head, zinc die casting Z 410
  • Ergonomic handle, non-slip, excellent power transfer and handling