Industrial Grease Gun

Item No. 12675
Industrial Grease Gun

Specifications

Brand
Pressol
Pressol industrial grease gun Comes complete with a M10x1150mm rigid angles delivery tube and M10x14-jaw coupler. Operates with greases up to  NLGI  grade 2 at 20°C Max delivery pressure 400 Bar. Designed for use in rough conditions, wall thickness grease gun tube: 1  mm Plunger with exactly fitting

Description

Pressol industrial grease gun
Comes complete with a M10x1150mm rigid angles delivery tube and M10x14-jaw coupler.
  • Operates with greases up to NLGI grade 2 at 20°C
  • Max delivery pressure 400 Bar.
  • Designed for use in rough conditions, wall thickness grease gun tube: 1 mm
  • Plunger with exactly fitting when using bulk grease or cartridge
  • Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions
  • Acc. to DIN 1283
  • TUV - certified
  • Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)
  • No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent compressed grease in the grease gun head from feeding back.
  • Performance unchanged after 40,000 operating cycles
  • Separate filling and ventilation valves on grease gun head
  • Grease gun head, zinc die casting Z 410
  • Sure grip handling due to deep band knurls
  • Slip resistant handle on grease gun lever
  • The ergonomic handle of the plunger rod assists in overcoming the spring load
  • Enables even under extreme back pressure, a variable lubrication pressure with steady effort applied
  • Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point.
  • Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges.
  • Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify)
  • High-speed ventilation, by half a rotation of the grease gun tube
Item No. 12675

Industrial Grease Gun

Industrial Grease Gun

Specifications

Brand
Pressol

Description

Pressol industrial grease gun
Comes complete with a M10x1150mm rigid angles delivery tube and M10x14-jaw coupler.
  • Operates with greases up to NLGI grade 2 at 20°C
  • Max delivery pressure 400 Bar.
  • Designed for use in rough conditions, wall thickness grease gun tube: 1 mm
  • Plunger with exactly fitting when using bulk grease or cartridge
  • Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions
  • Acc. to DIN 1283
  • TUV - certified
  • Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)
  • No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent compressed grease in the grease gun head from feeding back.
  • Performance unchanged after 40,000 operating cycles
  • Separate filling and ventilation valves on grease gun head
  • Grease gun head, zinc die casting Z 410
  • Sure grip handling due to deep band knurls
  • Slip resistant handle on grease gun lever
  • The ergonomic handle of the plunger rod assists in overcoming the spring load
  • Enables even under extreme back pressure, a variable lubrication pressure with steady effort applied
  • Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point.
  • Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges.
  • Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify)
  • High-speed ventilation, by half a rotation of the grease gun tube